Flap Peening Flaps
AMS-compliant flaps delivering consistent peening intensity. Perfect for treating small or hard-to-reach surfaces with precision.
Flap Peening Flaps for Controlled On-Tool Shot Peening
Achieve precise, localized shot peening on edges, radii and small bores with flap peening flaps. Paired with the correct mandrel and drive, these flaps deliver consistent intensity and coverage, helping you fine-tune fatigue performance and perform fast touch-ups without a full blasting setup.
Technical Data:
- Available sizes: 9/16" � 1" (Ref. 600 100), 9/16" � 1 1/4" (Ref. 600 101), 1" � 2" (Ref. 600 102)
- Shot size: S330 (embedded)
- Standards: Conforms to AMS 2590 and AMS 2592
- Recommended hole diameters: 9/16" � 1" for 1/2"-3/4" holes; 9/16" � 1 1/4" for 3/4"-1 1/4" holes
- Shipping weight: ~15 g per flap
- Mandrel compatibility: Use with Mandrel 600 200 (9/16" � 1"), 600 201 (9/16" � 1 1/4"), or 600 202 (1" � 2")
- Drive systems: Compatible with flexible-shaft motor kits or pneumatic tools designed for flap peening
Frequently Asked Questions
Which flap size should I choose?
Match the flap to your feature size: 9/16" � 1" for 1/2"-3/4" holes and 9/16" � 1 1/4" for 3/4"-1 1/4" holes. Use 1" � 2" for larger faces or external radii.
What media do these flaps use?
They are built with S330 shot to deliver the required peening intensity for common aerospace and industrial applications.
Which mandrel do I need?
Use Mandrel 600 200 for the 9/16" � 1" flap, 600 201 for the 9/16" � 1 1/4" flap, and 600 202 for the 1" � 2" flap.
Are they compliant with peening specifications?
Yes. The flaps conform to AMS 2590 and AMS 2592 for flap peening processes.
How do I verify RPM and intensity?
Use a digital tachometer to check tool RPM and an Almen gage with the appropriate strips to confirm intensity during setup and audits.
